Distributor login
EN

Distributors

  • Login
Features Design Specs Downloads Upgrades More
The Performance Series

EVO3 Syncro Uni

Syncro Uni incorporates unique DC-cancelling electronics that rebalance the mains sine wave on the zero volts line to dramatically reduce/silence transformer hum. This sophisticated product can be used independently for a single component, or in combination with another IsoTek power cleaner as an upgrade and to deliver a fully rebalanced sine wave across all output sockets.

Features
  • Suitable for all audio or AV systems
  • DC on the mains cancellation
  • Reduces/eliminates transformer hum by replacing the mains sine wave on the zero volts line
  • Use before existing power cleaners for performance upgrade
  • Fully star-earthed network
  • Multi-strand 6n OFC silver-plated internal wiring with FEP dielectric
  • Use with standard IEC C13 (10A version) or C19 (16A version) power cable
  • 10A and 16A versions with UK, EU, US, AU & CH outlets available
Click on an icon to get more information.

Sine Wave Correction


From a high quality audio point of view, mains electricity needs two factors; a nice 50 or 60Hz sine wave supplied from a very low impedance source, without radio frequency noise. The low impedance makes for a near constant voltage regardless of how much power is used in the surrounding area. In reality we can typically expect around 5% fluctuation. The very low impedance of the mains, which is way below 1 ohm at 50 or 60Hz is not maintained when approaching radio frequencies (> 50 ohms > 100 kHz) and acts as an aerial (antenna) inviting RF noise.

IsoTek’s power cleaning circuits are designed to reduce impedance whilst remaining safe as well as correcting well into the audio frequency bands. This is not only a judgment from sound electrical engineering, but it also follows the codes of electrical safety, which are independently assessed.

High Grade Components


Every IsoTek product uses the finest grade electrical components, many custom made, using the highest quality metals and materials which are specifically designed for purpose. Quality doesn’t stop at parts but also extends into the PCB designs, which maintain high levels of amperage and extraordinary low levels of resistance, using up to eight times the general standard of copper prior to pure silver plating.

Internal wiring also uses high purity coppers combined with silver plating, with either Fluorinated Ethylene Propylene (FEP) dielectric or IsoTek’s Virtual Dielectric of Air (VDA), where a FEP tube is wound around the conductor before an extruded FEP dielectric protects this construction giving unrivalled performance and the ultimate low resistance, high performance internal power delivery system.

Multi 6N OFC Ag


As one would expect, the internal wiring of any IsoTek product is of the highest standard, pure 6n oxygen free copper conductor strands with silver-plating offer low resistance and high amperage. An FEP dielectric is used to protect the conductors as well as giving the ultimate internal power delivery system.

IsoTek’s internal wiring synergizes with the range of IsoTek power cables. One critical but overlooked area is maintaining commonality of design and material properties though an audio wiring loom, be it signal carrying cables or your power cable network.

3 Year Warranty


As part of our on-going commitment to the highest standards of customer service, IsoTek offers you the opportunity to extend the standard 2 years product warranty to 3 years, free of charge.

Simply register your purchase with IsoTek. We do not share your personal details with any third parties without your permission. To read our Privacy Policy please click here.

Available colors
Perspective
Front
Back

Sine Wave Correction


From a high quality audio point of view, mains electricity needs two factors; a nice 50 or 60Hz sine wave supplied from a very low impedance source, without radio frequency noise. The low impedance makes for a near constant voltage regardless of how much power is used in the surrounding area. In reality we can typically expect around 5% fluctuation. The very low impedance of the mains, which is way below 1 ohm at 50 or 60Hz is not maintained when approaching radio frequencies (> 50 ohms > 100 kHz) and acts as an aerial (antenna) inviting RF noise.

IsoTek’s power cleaning circuits are designed to reduce impedance whilst remaining safe as well as correcting well into the audio frequency bands. This is not only a judgment from sound electrical engineering, but it also follows the codes of electrical safety, which are independently assessed.

High Grade Components


Every IsoTek product uses the finest grade electrical components, many custom made, using the highest quality metals and materials which are specifically designed for purpose. Quality doesn’t stop at parts but also extends into the PCB designs, which maintain high levels of amperage and extraordinary low levels of resistance, using up to eight times the general standard of copper prior to pure silver plating.

Internal wiring also uses high purity coppers combined with silver plating, with either Fluorinated Ethylene Propylene (FEP) dielectric or IsoTek’s Virtual Dielectric of Air (VDA), where a FEP tube is wound around the conductor before an extruded FEP dielectric protects this construction giving unrivalled performance and the ultimate low resistance, high performance internal power delivery system.

Multi 6N OFC Ag


As one would expect, the internal wiring of any IsoTek product is of the highest standard, pure 6n oxygen free copper conductor strands with silver-plating offer low resistance and high amperage. An FEP dielectric is used to protect the conductors as well as giving the ultimate internal power delivery system.

IsoTek’s internal wiring synergizes with the range of IsoTek power cables. One critical but overlooked area is maintaining commonality of design and material properties though an audio wiring loom, be it signal carrying cables or your power cable network.

3 Year Warranty


As part of our on-going commitment to the highest standards of customer service, IsoTek offers you the opportunity to extend the standard 2 years product warranty to 3 years, free of charge.

Simply register your purchase with IsoTek. We do not share your personal details with any third parties without your permission. To read our Privacy Policy please click here.

Awards

Design

The Syncro Uni is designed to dramatically reduce/silence transformer hum, when transformers within equipment, typically power amplifiers, mechanically vibrate. Syncro Uni can also be used as a ‘pre-filter’ device that can be used with any power cable or power conditioning system.

Housed in a steel and aluminum chassis measuring 215mm in length, 75mm wide and 70mm high. Syncro Uni incorporates unique DC-cancelling electronics that rebalance the mains sine wave on the zero volts line, to dramatically reduce/silence transformer hum; the circuit synchronizes the mains supply to provide a perfectly symmetrical sine wave, which also delivers significant sonic improvement when used with any hi-fi separates. The internal wiring is of the highest standard, pure 6n oxygen free copper conductor strands with silver-plating offer low resistance and high amperage. A PTFE dielectric is used to protect the conductors as well as giving the ultimate internal power delivering system.

The internal wiring of IsoTek products synergizes with the range of IsoTek power cables. One critical but overlooked area is maintaining commonality of design and material properties though an audio wiring loom, be it signal carrying cables or your power cable network.

Specifications

Conductors Silver plated OCC copper conductors
Dielectric Virtual Air Dielectric (VAD)
Mains inlet 10A IEC C14 or 16A IEC C20
Mains voltage 100-240V
Mains frequency 50-60Hz
Dimensions 75 x 70 x 215mm (WxHxD)
Weight 1.1Kg

Available outlets

Recommended Upgrades

EVO3 Aquarius

One of the most cost-effective upgrades you can buy for any high-quality audio system, Aquarius is a multi-award-winning six-way mains conditioner that redefines the power cleaning market. Two high-current outlets are provided for amplifiers, subwoofers and so on, with four medium-current sockets for other components. Each outlet of Aquarius has its own dedicated power cleaning network, thus six power cleaners in one box!

EVO3 Aquarius
READ MORE
EVO3 Initium

EVO3 Initium is IsoTek’s new entry level power cable designed to offer high quality performance at an extremely fair price.

EVO3 Initium
READ MORE
EVO3 Optimum

A high quality FEP provides a very low dielectric constant over a wide frequency range. The three conductors are given a slight rotational twist to aid RFI and EMI rejection, and are then surrounded by a cotton filler which give internal strength and reduce microphony.

EVO3 Optimum
READ MORE

There's more …

Award / Review
04/2021
EVO3 Syncro Uni – Noble DC monitor for clean sound

“Upgrading the audio system can be so easy: As a compact unit, the IsoTek EVO3 Syncro Uni protects all components from unwanted DC that can degrade the sound – and this DC-cancellation results in astonishing changes in the sound .. The system gains vitality, clarity and dynamics as well as a further expanded soundstage.”

Award / Review
12/2019
Cable of the Year – and the hum goes away

“It’s surprising just how much noise we put up with in audio, especially when the cure is so easy. You plug the EVO3 Syncro Uni in between the system and the wall, and the hum goes away.”

 

Award / Review
08/2019
EVO3 Syncro Uni is Hi-Fi+ Award Winner 2019

“The EVO3 Syncro Uni is a perfect introduction to IsoTek, as it offers almost no disruption in your existing system (except for the purchase of a single additional power cord) and offers a noticeable and repeatable performance boost.”

Award / Review
08/2019
Performance Boost

“The EVO3 Syncro Uni is a perfect introduction to IsoTek, as it offers almost no disruption in your existing system (except for the purchase of a single additional power cord) and offers a noticeable and repeatable performance boost.”

Award / Review
11/2018
High Recommendations

“With the EVO3 Syncro Uni… I am instantly aware of an increase in the spaciousness that’s around the instrument…vocals are more lucid, and the powerful bass has a more forceful punch. It is an effective addition to my setup.”

Press
05/2018
Perfect synchronization with the Syncro Uni!

The Syncro Uni is an evolution of the
multi-award-winning EVO3 Syncro which
was originally launched in 2014.

Where to buy

Clean Power for 50+ Countries

IsoTek has appointed distributors across the world to support its products and to give you the customer the best local service by professionals appointed through our distributors network. Please choose your country to find a local IsoTek supplier near you.