Partner login
EN
This unique design consists of deep cryogenically treated silver plated Ohno continuous cast copper conductors, wrapped in a dielectric of air, with partial FEP contact, before a further extruded FEP sleeve seals the construction. Each of these individual conductor assemblies are wrapped in Mylar with a further OFC shield before being given a slight rotational twist with FEP tubes of air.
Ascension drops the noise floor to an inky black level, opens the soundstage with holographic images, air and space and unparalleled micro dynamics. Astonishing.
CONSTRUCTION: The conductors are in a parallel configuration with a slight rotational twist. This established technique remains the first line of defence against RFI and EMI rejection.
A) Conductors: 4.0sqmm silver-plated Ohno Continuous Cast copper conductors offer a vastly superior level of purity compared with traditional OFC. Each conductor is deep cryogenically treated down to -196° C. The geometry and metallurgy used in this cable offer superb performance with extremely impressive electrical conductivity.
B) Dielectric: To obtain a dielectric constance close to a vacuum, IsoTek has created a Virtual Air Dielectric offering just 1.0548 dielectric constance. This air barrier is achieved by minimal conductor contact and the use of an FEP (Teflon) bridge. FEP is an excellent dielectric in its own right, with low coefficient, and the first choice for safety in both temperature and electrical insulation.
C) Filler: Clear FEP (Teflon) air tubes surround each conductor maintaining low dielectric constance and cable construction stability.
D) Wrap: Each conductor assembly is wrapped in Mylar to offer individual conductor shielding as well as a further barrier against RFI.
E) Shield: An earthed OFC shield insures maximum RFI rejection, thus preventing common mode noise affecting the live and neutral conductors.
F) Jacket: PVC is used as an outer jacket to give a high degree of flexibility and mechanical strength.
TERMINATION: The Ascension cable is terminated using IsoTek’s bespoke ultra high grade audiophile connectors of solid OFC with pure silver-plated conductors. These offer the highest level of conductivity and quality performance.
As one would expect the internal wiring of any IsoTek product is of the highest standard, ultra pure Ohno Continuous Cast copper solid core conductor strands with silver-plating offers low resistance and high amperage. A Fluorinated Ethylene Propylene (FEP) helix is wound around the conductor before an extruded FEP dielectric protects the conductor and creates a Virtual Dielectric of Air (VDA). This construction gives unrivalled performance and gives the ultimate low resistance, high performance internal power delivery system.
IsoTek’s internal wiring synergizes with the range of IsoTek power cables. One critical but overlooked area is maintaining commonality of design and material properties though an audio wiring loom, be it signal carrying cables or your power cable network.
Every IsoTek product uses the finest grade electrical components, many custom made, using the highest quality metals and materials which are specifically designed for purpose. Quality doesn’t stop at parts but also extends into the PCB designs, which maintain high levels of amperage and extraordinarily low levels of resistance, using up to eight times the general standard of copper prior to pure silver plating.
Internal wiring also uses high purity coppers combined with silver plating, with either Fluorinated Ethylene Propylene (FEP) dielectric or IsoTek’s Virtual Dielectric of Air (VDA), where a FEP tube is wound around the conductor before an extruded FEP dielectric protects this construction giving unrivalled performance and the ultimate low resistance, high performance internal power delivery system.
As one would expect the internal wiring of any IsoTek product is of the highest standard, ultra pure Ohno Continuous Cast copper solid core conductor strands with silver-plating offers low resistance and high amperage. A Fluorinated Ethylene Propylene (FEP) helix is wound around the conductor before an extruded FEP dielectric protects the conductor and creates a Virtual Dielectric of Air (VDA). This construction gives unrivalled performance and gives the ultimate low resistance, high performance internal power delivery system.
IsoTek’s internal wiring synergizes with the range of IsoTek power cables. One critical but overlooked area is maintaining commonality of design and material properties though an audio wiring loom, be it signal carrying cables or your power cable network.
Every IsoTek product uses the finest grade electrical components, many custom made, using the highest quality metals and materials which are specifically designed for purpose. Quality doesn’t stop at parts but also extends into the PCB designs, which maintain high levels of amperage and extraordinarily low levels of resistance, using up to eight times the general standard of copper prior to pure silver plating.
Internal wiring also uses high purity coppers combined with silver plating, with either Fluorinated Ethylene Propylene (FEP) dielectric or IsoTek’s Virtual Dielectric of Air (VDA), where a FEP tube is wound around the conductor before an extruded FEP dielectric protects this construction giving unrivalled performance and the ultimate low resistance, high performance internal power delivery system.
| CONDUCTOR SIZE | 3 x 4.0sqmm |
| CONDUCTOR MATERIAL | Silver plated Ohno continuous cast copper (OCC) |
| CONDUCTOR TREATMENT | Deep Cryogenic -196 degrees C |
| DIELECTRIC | Air with partial Fluorinated Ethylene Propylene (FEP) contact |
| DIELECTRIC CONSTANCE | 1.1 |
| FILLER | Fluorinated Ethylene Propylene (FEP) tubes of air |
| PVC BARRIER | Mylar/OFC braid |
| SHIELD | Oxygen free copper braid (OFC) individually applied to each conducter |
| OUTER JACKET | High flexibility PVC |
| CABLE POWER RATING | 55Amp |
| CABLE LENGTH | 2m, 3m, 5m standard (custom lengths available) |
| OUTER DIAMETER | 20mm |
| TERMINATION | Silver-plated OFC audiophile-grade connectors |
The EVO3 Genesis One is a state of the art single cell sine wave generation system with extremely low THD. The system can be used to dramatically improve single front-end components. Each cell can be combined / linked together so that only one input wall socket cable is required.
The Titan One re-engineers IsoTek’s unique multi-award winning Direct-Coupled© technology into a discrete single cell version, offering the ultimate high current, low impedance power conditioner in the smallest form factor possible.
The EVO3 Mosaic Genesis is a hybridised version of IsoTek’s Ultimate series. Combining the extremely low THD sine wave generation engine from Genesis and a lighter version of the EVO3 Super Titan’s Direct-Coupled© conditioning network, it delivers the perfect balance between power and performance.
“EVO3 Ascension is not IsoTek’s first cable. Its not even the company’s first ‘real’ cable. But it is ‘born to the purple’; the first cable that will be taken really seriously by audio’s glitterati. Highly recommended!”
The Ascension represents the ultimate in conductor purity and power cable construction.
“The EVO3 Ascension is a fine power player in its own right…and after 24 hours of running in, it can really deliver the musical goods. This cable really lowers the noise floor and lets the soundstage breathe! “
IsoTek has appointed distributors across the world to support its products and to give you the customer the best local service by professionals appointed through our distributors network. Please choose your country to find a local IsoTek supplier near you.
